CAD Library
Workholding Foundations
AMROK Cast Iron Tombstones
TRIAG Epoxy Mineral Tombstones
Fixture Plates & Grid Plates
4th Axis Trunnion Tables & Rotary Tables
5-Axis Pyramids
Workholding Systems
AMROK Workholding
5th Axis Workholding
Mitee-Bite Workholding
T-slot Clamps
Quick-install clamps for T-slot tables—simple, secure, and strong.
Compact Toe Clamps
High-force clamping in tight spaces with minimal tool interference.
Concentric OD Clamps
Outside-diameter clamps that grip round parts quickly and concentrically.
Heavy Duty T-Slot Clamps
Reinforced T-slot clamps built for large parts and aggressive machining.
Dyna-Force Clamps
Adjustable edge clamps that deliver consistent force with minimal distortion.
Fixture Clamps
Economical low-profile clamps for direct mounting on T-slots or plates.
ID Xpansion Clamp
Internal-expansion clamps that secure parts from the inside out—ideal for 5-axis access.
Knife Edge Clamps
Aggressive, low-profile clamps that bite into cast or uneven parts.
Locating Rails
Fixture-mounted rails that quickly locate and support parts for edge clamping.
Long Length Channel (7075-T6) & Steel Wedge
Strong, lightweight clamping channels designed for high-load, multi-part fixtures.
Machinable Fixture Clamps
Edge clamps with a soft clamping face that can be custom-machined to match your part.
Multi-Fixture Clamps & Stops
Compact, adjustable components for building high-density fixture arrays.
Pitbull Clamps
Ultra-low-profile clamps that bite hard and don’t let go—even in heavy cuts.
Pitbull Clamps (Machinable)
All the grip of a Pitbull—custom-fit for your part profile.
Pitbull Clamps (Modular)
Pre-mounted Pitbull units for plug-and-play fixture design.
Talongrip Serrated Jaws
Aggressive, low-profile vise jaws that grip rough stock with just 1.5 mm of material.
Talongrip Serrated Jaws (Long Length)
Extended-length Talon Grip jaws for high-density clamping of multiple workpieces.
Uniforce Clamps
Multi-part clamping with a single screw—compact, consistent, and powerful.
Uniforce Clamps (Machinable)
Precision clamping with soft jaws you can shape to your parts.
Uniforce Clamps (Long Length Machinable)
Customizable, long-format clamps for consistent multi-part workholding.
Schunk Workholding
VERO-S NSE Plus for Standard Machining
Trusted quick-change performance with up to 40 kN of pull-in force.
Clamping Pins
Form-fit accuracy and heavy-duty hold—essential for every zero-point setup.
KONTEC KSC-F Traditional Vise
Flat, powerful, and ready for palletized or high-precision work.
KONTEC KSC3 Self-Centering Vise
A self-centering vise with high clamping force and precision for fast, reliable part positioning.
KONTEC KSC-D Dual-Station Vise
Clamp two parts independently to double your output per cycle with this dual-station vise.
VERO-S NSE mini for Light Machining
Low-profile, zero-point clamping ideal for small parts and tight setups.
VERO-S NSE3 for Standard Machining
SCHUNK's most rigid and precise module—built for heavy-duty machining.
Reduction Adapters and Risers
Elevate your setup for better tool clearance and multi-part consistency.
KONTEC KSC3-K Traditional Vise
Rigid fixed-jaw clamping with quick jaw swaps and sealed design.
KONTEC KSC mini Self-Centering Vise
Compact and agile self-centering vise—ideal for small parts and multi-vise setups.
VERO-S NSE mikro for Light Machining
The flattest quick-change module in the world—just 12 mm tall.
KONTEC KSG Traditional Vise
Fast lever clamping with force amplification—built for high-throughput jobs.
Clamping Pins with T-nuts
Bring quick-change compatability to any T-slot machine table—no retrofit necessary.
Clamping Pins for Insertion in Pin Holes
Flush-mounted precision clamping when every millimeter counts.
KONTEC KSX Traditional Vise
Maximum tool access for true 5-axis machining—no jaw interference.
Clamping Pins for Flexible Mounting
Designed to compensate for misalignment—perfect for irregular setups.
KONTEC KSX-C2 Traditional Vise
Adjustable centering and active pull-down for full 6-sided machining.
Swiss Modular Workholding
powerCLAMP
A versatile rail-based workholding platform with 180+ interchangeable clamping modules for fast, high-density setups on 3-, 4-, or 5-axis CNC machines.
triCENTRO
Precision self-centering vises designed for balanced, repeatable clamping with manual or pneumatic actuation, ideal for 5-axis and automation-ready environments.
microCLAMP
Compact modular clamps engineered for maximizing part density and clamping force in small-part production on tombstones or subplates.
aptoCLAMP
A high-force modular clamping system built for large, heavy parts, combining flexible rail mounting with exceptional rigidity and chip-resistant design.
oppSYSTEM
A fast, precise zero-point pallet system that enables manual or robotic fixture changes in seconds with up to 750,000-cycle repeatability.
trivaCLAMP
Vacuum-based clamping modules that gently secure fragile, thin-walled, or irregular parts without distortion or marking.
Accessories
Precision alignment rails, zero-point locating pins, and mounting hardware designed to enhance modular compatibility, setup repeatability, and fixture stability across the entire Swiss Modular workholding system.
AMLOK Rod Locks
RCH Hydraulic Rod Lock
Heavy-duty hydraulic rod lock delivering axial holding forces from 1,100 to 80,000 lbf. Spring-engaged, hydraulic-released design; fits NFPA cylinders.
RCHX Hydraulic Rod Lock (Exclusion Series)
Rugged hydraulic rod lock for severe and submersible applications. Features enhanced sealing and corrosion-resistant construction for extreme conditions.
RLI Pneumatic Rod Lock (ISO 15552 Metric)
Compact pneumatic rod lock providing axial holding forces from 200 to 2,450 lbf. Spring-engaged, pneumatic-released design; fits ISO 15552 cylinders.
RLN Pneumatic Rod Lock (NFPA - Inch)
Compact pneumatic rod lock providing axial holding forces from 200 to 2,450 lbf. Spring-engaged, pneumatic-released design; fits NFPA cylinders.
Machine Design Components
AMROK Machine Design Components
ASA Squeeze Bushings
The ASA Series offers a compact, short-length design that’s perfect for tight spaces and high-density fixture layouts, delivering reliable 360° gripping in a small footprint.
AST Flanged Squeeze Bushing
Provides secure, concentric shaft clamping with resistance to both axial and torque loads, making them ideal for demanding industrial applications.
Hydraulic Clamp Disks
Delivers precise, reliable shaft-hub connections with high torque transmission and easy assembly for industrial machinery.
Hydraulic Clamp Rings
Reliable, backlash-free shaft-hub connections with easy installation and high torque transmission for precision engineering.
Spieth Locknuts & Keyless Clamping Sleeves
MSR - Standard Locknuts
The MSR series delivers unparalleled versatility with its infinitely adjustable positioning, ideal for precision securing in diverse mechanical applications.
DSK/DSL - Integrated Clamp Screws
Spieth DSK/DSL keyless clamping sleeves enable fast, precise shaft-hub connections with integrated screws for effortless installation and ultrahigh concentricity.
DSM - Integrated Clamp Screws
Spieth DSM clamping sleeves are tailored for motor shafts, delivering friction-locked, high-torque connections optimized for motor-driven applications.
AK/IK – Short External Clamp Force Initiation
Spieth AK/IK clamping sleeves offer automation-ready shaft-hub connections with flexible clamping initiation for enhanced precision in automated systems.
AL/IL – Long External Clamp Force Initiation
Spieth AL/IL clamping sleeves utilize hydraulic tensioning to achieve superior concentricity in high-precision shaft-hub connections.
FDK/FDL – Guide Bushings (External Play Adjustment)
Delivering high-precision linear guidance with adjustable play, the FDK/FDL series ensures smooth operation and easy assembly, even in dynamic and high-power-density applications.
FSK/FSL – Guide Bushings (Internal Play Adjustment from Clamp Screws)
Designed for linear guidance with integrated clamping, the FSK/FSL series combines precise sleeve or column guidance with secure, repeatable clamping in any position.
FAK/FAL – Guide Bushings with Clamping (External Force Initiation)
Ideal for applications requiring both precise round guidance and position-specific clamping, the FAK/FAL series offers consistent, vibration-damped performance with easy play adjustment.
MSA - Reduced Face Contact Locknuts
Engineered for precise bearing mounting, the MSA series excels in compact assemblies with its optimized design for angular contact and cylindrical roller bearings.
MSF - Low Profile Locknuts
The MSF series offers a low-profile, flat design, perfect for space-constrained installations requiring high load capacity
MSW - Heavy Duty Locknuts
Built for durability, the MSW series ensures robust locking and effortless assembly in high-stress, dynamic environments.